Deye SUN3 6 5 6 7 6 8KSG05LP1EU 3 68KW Single Phase 2 MPPT Hybrid Inverter LV Battery Supported 336
Engineered for residential and small commercial solar installations, this advanced hybrid inverter combines exceptional performance with intelligent battery management. The unit delivers 3600W of nominal AC power while maintaining an impressive maximum efficiency of 97.6%, ensuring optimal energy conversion throughout its operation.
Featuring dual MPPT channels with a wide voltage range of 150-425V, this single-phase inverter can handle up to 13A per MPPT channel, maximizing solar harvest from multiple array orientations. The robust IP65 protection rating and extreme operating temperature range from -40°C to +60°C make it suitable for harsh outdoor environments. With low 3% total harmonic distortion and comprehensive battery support capabilities, this 24.9kg inverter represents a reliable solution for modern hybrid solar systems requiring both grid-tie and energy storage functionality.
Technical Specifications
Alternatives →| Nominal AC Power | 3600 W |
| Maximum Efficiency | 97.6 % |
| European Efficiency | 96.5 % |
| MPPT Voltage Range | 150-425 V |
| Maximum DC Input Voltage | 500 V |
| Number of MPPT Channels | 2 |
| Maximum DC Input Current per MPPT | 13 A |
| AC Output Voltage | 230 V |
| AC Output Frequency | 50 Hz |
| Total Harmonic Distortion (THD) | 3 % |
| Weight | 24.9 kg |
| Enclosure Protection Rating | IP65 |
| Operating Temperature Range | -40 to +60 °C |
| Inverter Type | Hybrid |
| Number of Phases | 1 |
Frequently asked questions
How much DC current can each input of the Deye SUN3.6-5-6-7.6-8K-SG05LP1-EU accept?
Each of the two MPPT channels of the Deye SUN3.6-5-6-7.6-8K-SG05LP1-EU is recorded at 13 A of maximum DC input current, a modest figure next to the 26 A common on larger Deye units. It suits one string of ordinary modules per channel and leaves no room for paralleling two strings onto a single input.
What output is recorded for the Deye SUN3.6-5-6-7.6-8K-SG05LP1-EU?
The designation of the Deye SUN3.6-5-6-7.6-8K-SG05LP1-EU spans 3.6 kW to 8 kW, and the single power figure held for this entry is 3600 W of nominal AC power, the bottom of that range. No maximum AC power is stored, so the short-term overload headroom of this variant cannot be quoted from the recorded data.
Does the Deye SUN3.6-5-6-7.6-8K-SG05LP1-EU work with a battery?
The inverter type recorded for the Deye SUN3.6-5-6-7.6-8K-SG05LP1-EU is hybrid, so it is designed to charge and discharge a battery alongside feeding the array's output to the grid. No battery voltage, current or capacity figures are stored here, so storage compatibility has to be confirmed against the manufacturer's own documentation.
How should the strings on a Deye SUN3.6-5-6-7.6-8K-SG05LP1-EU be laid out?
The Deye SUN3.6-5-6-7.6-8K-SG05LP1-EU tracks between 150 V and 425 V and tolerates 500 V of maximum DC input voltage. With 3600 W of nominal output and 13 A per channel, the natural layout is one moderate string on each of the two inputs, kept below 500 V open circuit at the lowest temperature expected on site.
How much does the Deye SUN3.6-5-6-7.6-8K-SG05LP1-EU weigh?
The Deye SUN3.6-5-6-7.6-8K-SG05LP1-EU is recorded at 24.9 kg, heavy relative to its 3600 W nominal output and a sign of a chassis shared across a designation that reaches 8 kW. Plan on two people for the lift and a wall able to carry the load, rather than treating it as a light domestic box.
What supply and siting does the Deye SUN3.6-5-6-7.6-8K-SG05LP1-EU need?
The Deye SUN3.6-5-6-7.6-8K-SG05LP1-EU is single-phase with a 230 V, 50 Hz AC output, so it suits an ordinary European domestic connection with no three-phase service required. It is rated IP65 across -40 to +60 degrees Celsius, which allows an outdoor wall position, and its total harmonic distortion is listed at 3 percent.
Source: www.deyeinverter.com