# SolarEdge SE10000H

Type: solar inverter
Manufacturer: SolarEdge
URL: https://inverterdata.com/en/solaredge/solaredge-se10000h/
Manufacturer source: https://www.solaredge.com/us/products/residential/pv-inverters
Database: InverterData (inverterdata.com)
License: free to quote with attribution to inverterdata.com

## Overview

Professional solar installations demand reliable power conversion equipment that maximizes energy harvest while ensuring long-term durability. This high-capacity string inverter delivers exceptional performance with its advanced HD-Wave technology, achieving maximum efficiency ratings of 99.2% to minimize power losses during DC to AC conversion. The single-phase unit handles up to 10,000 watts of nominal AC power output while accepting DC input voltages up to 480V, making it ideal for large residential and small commercial solar arrays.

Built for challenging outdoor environments, the inverter features NEMA 4X protection rating to withstand moisture, dust, and temperature extremes. Its compact design weighs just 13.2 kg while delivering pure sine wave output at 240V AC, ensuring clean power compatible with sensitive electronic equipment and grid-tie applications.

## Specifications

| Specification | Value |
| --- | --- |
| Nominal AC Power | 10000 W |
| Maximum AC Power | 10000 W |
| Maximum Efficiency | 99.2 % |
| Maximum DC Input Voltage | 480 V |
| AC Output Voltage | 240 V |
| Output Wave Type | Pure Sine Wave |
| Weight | 13.2 kg |
| Enclosure Protection Rating | NEMA 4X |
| Inverter Type | String Inverter (HD-Wave) |
| Number of Phases | 1 |

Not published by the manufacturer: European Efficiency, MPPT Voltage Range, Number of MPPT Channels, Maximum DC Input Current per MPPT, AC Output Frequency, Total Harmonic Distortion (THD), Operating Temperature Range.

## Frequently asked questions

### What size solar array does the SolarEdge SE10000H suit?

The SolarEdge SE10000H is rated at 10000 W of nominal AC power and the same 10000 W as its maximum, so there is no peak boost above the nameplate. That points to a large domestic or small commercial array of roughly ten kilowatts, normally with some oversizing on the DC side to fill the inverter through the shoulders of the day.

### How efficient is the SolarEdge SE10000H?

The SolarEdge SE10000H is listed at 99.2 percent maximum efficiency, an unusually high figure for a string inverter and one that leaves under one percent of the array's DC energy lost in conversion at the best operating point. Only the maximum is recorded here, so no weighted European efficiency is available for yield estimates.

### What is the maximum DC input voltage of the SolarEdge SE10000H?

The SolarEdge SE10000H accepts 480 V of maximum DC input voltage. That ceiling is far below the 1000 V or 1100 V limits common on commercial inverters, so string design has to be checked against the coldest expected temperature, when open-circuit voltage peaks, and strings end up correspondingly shorter.

### Can the SolarEdge SE10000H be installed outdoors?

The SolarEdge SE10000H carries a NEMA 4X enclosure rating, the North American classification for outdoor equipment protected against windblown dust, hose-directed water and corrosion. It is a NEMA figure rather than an IP code, so it should be read against North American enclosure practice and not translated into an IP equivalent.

### How heavy is the SolarEdge SE10000H to mount?

At 13.2 kg the SolarEdge SE10000H is light for a ten-kilowatt inverter and sits within one-person lifting for most installers, which simplifies wall mounting and later servicing. The low mass comes with the HD-Wave string inverter design recorded for the unit, which dispenses with a bulky low-frequency magnetic stage.

### What grid connection does the SolarEdge SE10000H need?

The SolarEdge SE10000H is a single-phase inverter with a 240 V AC output and a pure sine wave waveform, so it is built for a single-phase North American style service rather than a three-phase supply. Ten kilowatts on one phase is substantial, and the network operator's limit on single-phase generation is worth confirming first.

---

Spanish version: https://inverterdata.com/es/solaredge/solaredge-se10000h/
All solar inverters: https://inverterdata.com/en/inverters/
Full database as Markdown: https://inverterdata.com/llms-full.txt