# Best Three-Phase Inverter for Commercial Solar: 5 Compared

Five three-phase solar inverters compared across the commercial and industrial power range, from a 10 kW rooftop unit to a 320 kW utility-scale system.

Source: https://inverterdata.com/en/best/best-three-phase-inverter-commercial/
Site: InverterData (inverterdata.com) — open technical specification database
Last updated: 2026-08-24
License: free to quote with attribution to inverterdata.com

---

## What Changes When the System Gets Bigger

A residential single-phase inverter tops out well below what a warehouse roof, a carport array, or a small industrial plant needs to feed. Three-phase output balances load across all three lines instead of pushing everything through one, which is what utilities require once an installation crosses the threshold where single-phase injection would unbalance the local grid. Beyond that threshold, the question stops being "how much power" and becomes "how the inverter is built to handle it": how many MPPT inputs it offers to track independent strings across different roof orientations or shading conditions, what enclosure rating it carries for a rooftop or ground-mount installation exposed to weather, and how wide an input voltage window it accepts as the array grows.

This roundup compares five three-phase inverters spanning that range, from an entry point sized for a small commercial rooftop up to units built for utility-scale plants with dozens of independent MPPT channels. None of them serve identical projects — a 10 kW unit and a 320 kW unit are not interchangeable, so the picks below are ordered by what each is actually built for rather than by raw output alone. The full specification table on this page pulls live from the database, so use it to compare a specific figure across all five once you know which power tier matches your installation.

| # | Model | Pick | Key specs |
|---|---|---|---|
| 1 | [Huawei Solar SUN2000-50KTL-M3](https://inverterdata.com/en/huawei-solar/huawei-sun2000-50ktl-m3/) | Best overall | 50000 W, 98.5 %, 200 V ~ 1,000 V, 400 Vac / 480 Vac V, 49 kg, Transformerless |
| 2 | [GoodWe GoodWe UT SERIES](https://inverterdata.com/en/goodwe/goodwe-ut-series/) | Most powerful | 320000 W, 99.05 %, 并网逆变器 |
| 3 | [Deye SUN120 125 130 135 136G01P3 120136KW Three Phase](https://inverterdata.com/en/deye/deye-sun120-125-130-135-136g01p3-120136kw-three-phase/) | Best for large commercial rooftops | [120000, 125000, 130000, 135000, 136000] W, 98.8 %, 200-1000 V, 220/380V, 230/400V, 103 kg, Non-Isolated |
| 4 | [SolarEdge SE33.3K](https://inverterdata.com/en/solaredge/solaredge-se33-3k/) | Best for mid-size commercial installations | 33300 W, 98.3 %, 277/480 V, Pure Sine Wave, 37.5 kg, String Inverter |
| 5 | [Fronius Symo GEN24 10.0 Plus](https://inverterdata.com/en/fronius/fronius-symo-gen24-10-0-plus/) | Best for small commercial installations | 10000 W, 98.2 %, 278-800 V, 400/230 V, 23.38 kg, Transformerless |

## 1. Best overall — Huawei Solar SUN2000-50KTL-M3

The SUN2000-50KTL-M3 sits at a power level — 50 kW rated, 55 kW maximum — that matches a mid-size commercial roof without stepping into utility-scale territory, and it backs that up with the most complete verified spec sheet of the group: 4 MPPT inputs for handling separate string orientations, a maximum efficiency of 98.5% (98.0% European weighted efficiency, the figure that better reflects real-world output across varying irradiance), and an IP66 enclosure rated for -25°C to 60°C operation. At 49 kg it is manageable for a two-person mount without requiring lifting equipment, and the 30A max input current gives it headroom for high-output panel strings. That combination of balance and completeness — not any single standout figure — is what puts it first.

Full specs: https://inverterdata.com/en/huawei-solar/huawei-sun2000-50ktl-m3/

## 2. Most powerful — GoodWe GoodWe UT SERIES

The UT Series is built for a different scale entirely: 320 kW rated power, up to 352 kW maximum, backed by 15 independent MPPT inputs — three to four times what the mid-size units on this list offer — for tracking dozens of separate string groups across a large ground-mount or utility array. A maximum efficiency of 99.05% is the highest verified figure in this comparison, and a 1500V maximum input voltage lets strings run longer before combiner boxes are needed, cutting DC cabling. The IP66 enclosure covers outdoor utility-scale deployment. This is not a fit for a standard commercial rooftop — it is the pick for a project that has already outgrown one.

Full specs: https://inverterdata.com/en/goodwe/goodwe-ut-series/

## 3. Best for large commercial rooftops — Deye SUN120 125 130 135 136G01P3 120136KW Three Phase

The SUN120-136G01P3 family covers 120 kW to 136 kW of rated power across its variants, with maximum output reaching 136 kW on the top model — a tier built for a large commercial or light-industrial rooftop that needs more than a single 50 kW unit but does not require utility-scale hardware. Eight MPPT inputs, double what the 50 kW-class inverters on this list offer, let it track independent string groups across a sprawling or irregularly shaded roof without derating. A maximum input current of 40A per input and a 98.8% efficiency figure round out a spec sheet aimed squarely at large-format commercial installs. At 103 kg it is the heaviest inverter here and needs proper mounting planning, which is the trade-off for that MPPT count.

Full specs: https://inverterdata.com/en/deye/deye-sun120-125-130-135-136g01p3-120136kw-three-phase/

## 4. Best for mid-size commercial installations — SolarEdge SE33.3K

The SE33.3K covers a power tier between the small-commercial and large-rooftop picks on this list: 33.3 kW rated and maximum power, with a verified 98.3% efficiency figure. It lists a single MPPT input rather than the multi-channel arrays of the other picks here — consistent with SolarEdge's architecture, where string-level optimization happens ahead of the inverter rather than through multiple independent MPPT trackers on the unit itself. The enclosure is rated NEMA 3R rather than an IP figure, and at 37.5 kg it sits close in weight to the 50 kW Huawei unit despite the lower power rating. It fits a project sized between a small rooftop and a large commercial array.

Full specs: https://inverterdata.com/en/solaredge/solaredge-se33-3k/

## 5. Best for small commercial installations — Fronius Symo GEN24 10.0 Plus

The Symo GEN24 10.0 Plus is the entry point on this list: 10 kW rated and maximum power, sized for a small commercial building rather than an industrial site. It still carries commercial-grade build quality — an IP66 enclosure rated for -25°C to 60°C, 2 MPPT inputs for handling two string orientations, and a verified efficiency of 98.2% (97.9% European weighted). At 23.38 kg it is by far the lightest inverter in this comparison, roughly half the weight of the next-lightest pick, which simplifies mounting on a smaller commercial roof that was not engineered for heavier utility-class hardware. For a project too large for a residential inverter but well short of a 50 kW commercial roof, this is the tier that fits.

Full specs: https://inverterdata.com/en/fronius/fronius-symo-gen24-10-0-plus/